To change the password on your Lloyd Instruments materials tester follow these instructions.
Press the
EDIT soft key on the Select Test/Edit screen.
If the machine has been given a password, the password entry display will be shown.
Type the password then press the
ENTER key.
If the password is not correct, the test Select / Edit Display will be redisplayed.
If the password is correct, the main setup display is shown.
Pressing the
ENTER key will return to the Select / Edit display.
If the password is not correct or forgotten then enter this number as the password: 574221.
This will allow immediate access to the main set up display where the old password can be viewed and changed if required.
Pressing the
GLOBAL soft key will allow the password to be changed.
Pressing the
CHANGE PASSWORD soft key brings up the following display:
Pressing the
BKSP soft key deletes one character at a time starting from right hand end of the password.
Pressing the
CLEAR ALL soft key deletes all characters.
The alphanumeric keys add new characters to the password and the
ENTER key accepts the password as displayed.
If the password displayed is blank then there will be no password protection.
The password limits access to the edit test setup menus. If a password has been set this password will be required before any parameter of any test setup can be edited. The selection and running of previously defined test setups is not affected.