International Standards - Plastics and Rubber

Standard
Description
ASTM D1238

This test method covers measurement of the rate of extrusion of molten resins through a die of a specified length and diameter under prescribed conditions of temperature, load, and piston position in the barrel as the timed measurement is being made. Experience our recommended plastics and rubber test equipment adherent to ASTM D1238 here.
ASTM D1414
These test methods describe the procedures for determining the physical properties of O-rings and changes in these properties due to aging. Experience our recommended plastics and rubber test equipment adherent to ASTM D1414 here.
ASTM D1456
  This test method covers determination of the elongation of soft vulcanized rubber compounds under a specified stress. Experience our recommended plastics and rubber test equipment adherent to ASTM D1456 here.
ASTM D1621
  This test method describes a procedure for determining the compressive properties of rigid cellular materials, particularly expanded plastics. Experience our recommended plastics and rubber test equipment adherent to ASTM D1621 here.
ASTM D1708
  This test method covers the determination of the comparative tensile strength and elongation properties of plastics in the form of standard microtensile test specimens when tested under defined conditions of pretreatment, temperature, humidity, and testing machine speed. It can be used for specimens of any thickness up to 3.2 mm (1/8 in.), including thin films. Experience our recommended plastics and rubber test equipment adherent to ASTM D1708 here.
ASTM D1894
  This test method covers determination of the coefficients of starting and sliding friction of plastic film and sheeting when sliding over itself or other substances at specified test conditions. The procedure permits the use of a stationary sled with a moving plane, or a moving sled with a stationary plane. Both procedures yield the same coefficients of friction values for a given sample. Experience our recommended plastics and rubber test equipment adherent to ASTM D1894 here.
ASTM D2412
  This test method covers the determination of load-deflection characteristics of plastic pipe under parallel-plate loading. Experience our recommended plastics and rubber test equipment adherent to ASTM D2412 here.
ASTM D2653
  This test method covers the determination of the tensile properties of "as produced" elastomeric yarns made from natural rubber, spandex or other elastomers, using a constant-rate-of-extension (CRE) type tensile testing machine. Experience our recommended plastics and rubber test equipment adherent to ASTM D2653 here.
ASTM D2731
  This test method covers the determination of elastic properties of "as produced" elastomeric yarns made from rubber, spandex or other elastomers. Elastic properties include force at specified elongations, permanent deformation and stress decay. Other hysteresis related properties can be calculated. Experience our recommended plastics and rubber test equipment adherent to ASTM D2731 here.
ASTM D2990
  These test methods cover the determination of tensile and compressive creep and creep-rupture of plastics under specified environmental conditions. Experience our recommended plastics and rubber test equipment adherent to ASTM D2990 here.
ASTM D3291
  This practice determines the compatibility of plasticizers in poly(vinyl chloride) plastics by rating the amount of plasticizer that spews due to compressional stress set up inside a 180 loop bend.Experience our recommended plastics and rubber test equipment adherent to ASTM D3291 here.
ASTM D380
  These test methods describe procedures for inspection and test of all types and constructions of rubber hose. Experience our recommended plastics and rubber test equipment adherent to ASTM D380 here.
ASTM D3826
  This practice covers the determination of a degradation-end point (a brittle point) for degradable polyethylene/polypropylene films and sheeting less than 1.0 mm (0.04 in.) thick. Experience our recommended plastics and rubber test equipment adherent to ASTM D3826 here.
ASTM D3846
  This test method covers the determination of the in-plane shear strength of reinforced thermosetting plastics in flat sheet form in thicknesses ranging from 2.54 to 6.60 mm (0.100 to 0.260 in.). Experience our recommended plastics and rubber test equipment adherent to ASTM D3846 here.
ASTM D3914
  This test method covers the determination of the in-plane shear strength of pultruded, glass-fiber reinforced, thermosetting plastic rod of diameters ranging from 19 to 32 mm (¾ to 1¼ in.). Experience our recommended plastics and rubber test equipment adherent to ASTM D3914 here.
ASTM D3916
  This test method describes a procedure for determining the tensile properties of pultruded, glass-fiber-reinforced thermosetting plastic rod of diameters ranging from 3.2 mm (1/ 8 in.) to 25.4 mm (1 in.). Experience our recommended plastics and rubber test equipment adherent to ASTM D3916 here.
ASTM D395
  These test methods cover the testing of rubber intended for use in applications in which the rubber will be subjected to compressive stresses in air or liquid media. They are applicable particularly to the rubber used in machinery mountings, vibration dampers, and seals. Experience our recommended plastics and rubber test equipment adherent to ASTM D395 here.
ASTM D412
  These test methods cover procedures used to evaluate the tensile (tension) properties of vulcanized thermoset rubbers and thermoplastic elastomers. These methods are not applicable to ebonite and similar hard, low elongation materials. Experience our recommended plastics and rubber test equipment adherent to ASTM D412 here.
ASTM D413
  These test methods cover the determination of the adhesion strength between plies of fabric bonded with rubber or the adhesion of the rubber layer in articles made from rubber attached to other material. Experience our recommended plastics and rubber test equipment adherent to ASTM D413 here.
ASTM D429
  These test methods cover procedures for testing the static adhesional strength of rubber to rigid materials (in most cases metals). Experience our recommended plastics and rubber test equipment adherent to ASTM D429 here.
ASTM D4321
  This test method covers the determination of yield (area per unit mass) of plastic film. Experience our recommended plastics and rubber test equipment adherent to ASTM D4321 here.
ASTM D4475
  This test method covers the determination of the apparent horizontal shear strength of fiber reinforced plastic rods. Experience our recommended plastics and rubber test equipment adherent to ASTM D4475 here.
ASTM D4476
  This test method covers the determination of the flexural properties of fiber-reinforced pultruded plastic rods. Experience our recommended plastics and rubber test equipment adherent to ASTM D4476 here.
ASTM D4482
  This test method covers the determination of fatigue life of rubber compounds undergoing a tensile-strain cycle. During part of the cycle, the strain is relaxed to a zero value. Experience our recommended plastics and rubber test equipment adherent to ASTM D4482 here.
ASTM D5083
  This test method covers the determination of the tensile properties of thermosetting reinforced plastics using test specimens of uniform nominal width when tested under defined conditions of pretreatment, temperature, humidity, and testing-machine speed. Experience our recommended plastics and rubber test equipment adherent to ASTM D5083 here.
ASTM D5748
  This test method determines the resistance of a stretch wrap film to the penetration of a probe at a standard low rate, a single test velocity. Experience our recommended plastics and rubber test equipment adherent to ASTM D5748 here.
ASTM D575
  These test methods describe two test procedures for determining the compression-deflection characteristics of rubber compounds other than those usually classified as hard rubber and sponge rubber. Experience our recommended plastics and rubber test equipment adherent to ASTM D575 here.
ASTM D5868
  This test method describes a lap shear test for use in measuring the bonding characteristics of adhesives for joining fiber reinforced plastics to themselves and to metals. The method is applicable to random and fiber oriented FRP. Experience our recommended plastics and rubber test equipment adherent to ASTM D5868 here.
ASTM D6049
  The viscosity and elasticity of unvulcanized rubbers and rubber compounds are determined by subjecting cylindrical test pieces to a compression/recovery cycle. The dependency on shear rate at constant shear stress is evaluated and the material fatigue behavior is determined in repeat cycle testing. Experience our recommended plastics and rubber test equipment adherent to ASTM D6049 here.
ASTM D6147
  This standard specifies two methods for determining the decrease in counterforce exerted by a test specimen of vulcanized rubber or thermoplastic elastomer which has been compressed at a constant deformation under specified conditions of time and temperature. Experience our recommended plastics and rubber test equipment adherent to ASTM D6147 here.
ASTM D624
  This test method describes procedures for measuring a property of conventional vulcanized thermoset rubber and thermoplastic elastomers called tear strength. Experience our recommended plastics and rubber test equipment adherent to ASTM D624 here.
ASTM D6272   This test method covers the determination of flexural properties of unreinforced and reinforced plastics, including high-modulus composites and electrical insulating materials in the form of rectangular bars molded directly or cut from sheets, plates, or molded shapes. Experience our recommended plastics and rubber test equipment adherent to ASTM D6272 here.
ASTM D6324
  These test methods cover and shall be used to evaluate male condoms made of various synthetic materials. Experience our recommended plastics and rubber test equipment adherent to ASTM D6324 here.
ASTM D638
  This test method covers the determination of the tensile properties of unreinforced and reinforced plastics in the form of standard dumbbell-shaped test specimens when tested under defined conditions of pretreatment, temperature, humidity, and testing machine speed. Experience our recommended plastics and rubber test equipment adherent to ASTM D638 here.
ASTM D6515
  This test method covers a procedure to determine the recovery response of rubber after particular bending deformation, subsequent to aging in selected media at a specified temperature, and for a specified time period, thus providing a measure of the relative performance potential of compounds used in the manufacture of shaft seals. Experience our recommended plastics and rubber test equipment adherent to ASTM D6515 here.
ASTM D6742
  This practice provides instructions for modifying open-hole tension and compression test methods to determine filled-hole tensile and compressive strengths. Experience our recommended plastics and rubber test equipment adherent to ASTM D6742 here.
ASTM D6746
  This test method describes a method to evaluate a characteristic of raw rubber or unvulcanized rubber compounds, or both, that is designated as tensile green strength. Experience our recommended plastics and rubber test equipment adherent to ASTM D6746 here.
ASTM D695
  This test method covers the determination of the mechanical properties of unreinforced and reinforced rigid plastics, including high-modulus composites, when loaded in compression at relatively low uniform rates of straining or loading. Experience our recommended plastics and rubber test equipment adherent to ASTM D695 here.
ASTM D732
  This test method covers the punch-type of shear test and is intended for use in determining the shear strength of test specimens of organic plastics in the form of sheets and molded disks in thicknesses from 0.127 to 12.7 mm (0.050 to 0.500 in.). Experience our recommended plastics and rubber test equipment adherent to ASTM D732 here.
ASTM D790
  These test methods cover the determination of flexural properties of unreinforced and reinforced plastics, including high-modulus composites and electrical insulating materials in the form of rectangular bars molded directly or cut from sheets, plates, or molded shapes. Experience our recommended plastics and rubber test equipment adherent to ASTM D790 here.
ASTM D882
  These test methods describe tests to measure the properties of adhesives, commonly called rubber cements, that may be applied in plastic or fluid form and that are manufactured from natural rubber, reclaimed rubber, synthetic elastomers, or combinations of these materials. Experience our recommended plastics and rubber test equipment adherent to ASTM D882 here.
ASTM D926
  This test method covers the determination of plasticity and recovery of unvulcanized rubber by means of the parallel plate plastometer. Uncompounded, compounded, and reclaim rubber may be tested. Experience our recommended plastics and rubber test equipment adherent to ASTM D926 here.
ASTM D953
  This test method covers the determination of the bearing strength of rigid plastics in either sheet or molded form. Experience our recommended plastics and rubber test equipment adherent to ASTM D953 here.
ASTM F1304
  This test method is used to determine the deflection of relatively rigid resilient floor tile such as vinyl composition tile. Experience our recommended plastics and rubber test equipment adherent to ASTM F1304 here.
ASTM F152
  These test methods cover the determination of tensile strength of certain nonmetallic gasketing materials at room temperature. Experience our recommended plastics and rubber test equipment adherent to ASTM F152 here.
ASTM F1574
  This test method covers the determination of compressive strength characteristics (crush-extrusion resistance) of gasket materials at elevated temperature. Experience our recommended plastics and rubber test equipment adherent to ASTM F1574 here.
ASTM F2018
  This test method covers the requirements to determine the time-to-failure of thermoplastic resins for piping applications by uniaxial loading of a grooved tensile test specimen. Experience our recommended plastics and rubber test equipment adherent to ASTM F2018 here.
ASTM F36
  This test method covers determination of the short-time compressibility and recovery at room temperature of sheet-gasket materials. Experience our recommended plastics and rubber test equipment adherent to ASTM F36 here.
ASTM F607
  This test method provides a means of determining the degree to which gasket materials under compressive load adhere to metal surfaces. Experience our recommended plastics and rubber test equipment adherent to ASTM F607 here.
ASTM F806
  This test method covers determination of the short-time compressibility and recovery at room temperature of laminated composite gasket materials. Experience our recommended plastics and rubber test equipment adherent to ASTM F806 here.
BS 2782-10:Method 1003:1977, EN 61:1977
  Methods of testing plastics. Glass reinforced plastics. Determination of tensile properties. Experience our recommended plastics and rubber test equipment adherent to BS 2782-10 and EN 61 here.
BS 2782-10:Method 1005:1977, EN 63:1977
  Methods of testing plastics. Glass reinforced plastics. Determination of flexural properties. Three point method. Experience our recommended plastics and rubber test equipment adherent to BS 2782-10 and EN 63 here.
BS 2782-11:Method 1110:1989
  Methods of testing plastics. Thermoplastics pipes, fittings and valves. Tensile properties of dumb-bell specimens from PVC gutter profiles of pipes for non-pressure applications. Experience our recommended plastics and rubber test equipment adherent to BS 2782-11 here.
BS 2782-3:Method 327A:1993
  Methods of testing plastics. Mechanical properties. Determination of tensile strength and elongation at break of polytetrafluoroethylene (PTFE) products. Experience our recommended plastics and rubber test equipment adherent to BS 2782-3 here.
BS 2782-3:Method 352F:1996, ISO 7765-2:1994
  Methods of testing plastics. Mechanical properties. Determination of impact resistance by the free-falling dart method (instrumented puncture test). Experience our recommended plastics and rubber test equipment adherent to BS 2782-3 and ISO 7765-2 here.
BS 2782-3:Methods 320A to 320F:1976
  Methods of testing plastics. Mechanical properties. Tensile strength, elongation and elastic modulus. Experience our recommended plastics and rubber test equipment adherent to BS 2782-3 320A and 320F here.
BS 490-10.5:1984
  Conveyor and elevator belting. Testing for physical properties. Method for determination of tensile strength and elongation at break of rubber covers. Experience our recommended plastics and rubber test equipment adherent to ASTM BS 490-10.5 here.
BS 5214-2:1978
  Specification for testing machines for rubbers and plastics. Constant rate of force application machines. Experience our recommended plastics and rubber test equipment adherent to BS 5214-2 here.
BS 5421-1:1976, ISO 2321-1975
  Methods of test for elastomeric threads. Rubber threads. Experience our recommended plastics and rubber test equipment adherent to BS 5421-1 and ISO 2321 here.
BS 5961:1980, IEC 60648:1979
  Method for determination of coefficients of friction of plastic film and sheeting for use as electrical insulation. Experience our recommended plastics and rubber test equipment adherent to BS 5961 here.
BS 903-A15:1990, ISO 8013:1988
  Physical testing of rubber. Method for determination of creep in compression or shear. Experience our recommended plastics and rubber test equipment adherent to BS 903-A15 and ISO 8013 here.
BS 903-A2:1995, ISO 37:1994
  Physical testing of rubber. Method for determination of tensile stress-strain properties. Experience our recommended plastics and rubber test equipment adherent to BS 903-A2 and ISO 37 here.
BS 903-A21.1:1997, ISO 813:1997
  Physical testing of rubber. Determination of rubber to metal bond strength. Adhesion to rigid substrates. 90° peel method. Experience our recommended plastics and rubber test equipment adherent to BS 903-A21 and ISO 813 here.
BS 903-A27:1986, ISO 4637:1979
  Physical testing of rubber. Determination of rubber to fabric adhesion. Direct tension method. Experience our recommended plastics and rubber test equipment adherent to BS 903-A27 and ISO 4637 here.
BS 903-A3.2:1997, ISO 34-2:1996
  Physical testing of rubber. Determination of tear strength. Small (Delft) test pieces. Experience our recommended plastics and rubber test equipment adherent to BS 903-A3 and ISO 34-2 here.
BS 903-A48:1984, ISO 4647:1982
  Methods of testing vulcanized rubber. Determination of static adhesion to textile cord (H-pull test). Experience our recommended plastics and rubber test equipment adherent to BS 903-A48 and ISO 4647 here.
BS 903-A52:1986, ISO 6914:1985
  Physical testing of rubber. Determination of ageing characteristics by measurement of stress at a given elongation. Experience our recommended plastics and rubber test equipment adherent to BS 903-A52 and ISO 6914 here.
BS 903-A56:1989, ISO 5603:1986
  Physical testing of rubber. Determination of adhesion to wire cord. Experience our recommended plastics and rubber test equipment adherent to BS 903-A56 and ISO 5603 here.
BS 903-A6:1992, ISO 815:1991
  Physical testing of rubber. Method for determination of compression set at ambient, elevated or low temperatures. Experience our recommended plastics and rubber test equipment adherent to BS 903-A4 and ISO 815 here.
BS EN 12814-1:2000
  Testing of welded joints of thermoplastics semi-finished products. Bend test. Experience our recommended plastics and rubber test equipment adherent to BS EN 12814-1 here.
BS EN 12814-2:2000
  Testing of welded joints of thermoplastics semi-finished products. Tensile test. Experience our recommended plastics and rubber test equipment adherent to BS EN 12814-2 here.
BS EN 12814-3:2000
  Testing of welded joints of thermoplastics semi-finished products. Tensile creep test. Experience our recommended plastics and rubber test equipment adherent to BS EN 12814-3 here.
BS EN 12814-4:2001
  Testing of welded joints of thermoplastics semi-finished products. Peel test. Experience our recommended plastics and rubber test equipment adherent to BS EN 12814-4 here.
BS EN 12814-6:2000
  Testing of welded joints of thermoplastics semi-finished products. Low temperature tensile test. Experience our recommended plastics and rubber test equipment adherent to BS EN 12814-6 here.
BS EN 12814-7:2002
  Testing of welded joints of thermoplastics semi-finished products. Tensile test with waisted test specimens. Experience our recommended plastics and rubber test equipment adherent to BS EN 12814-7 here.
BS EN 1393:1997, BS 2782-12:Methods 1210A to C
  Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Determination of initial longitudinal tensile properties. Experience our recommended plastics and rubber test equipment adherent to BS EN 1393 and BS 2782-12 here.
BS EN 1394:1997, BS 2782-12:Methods 1211A, B, C1, C2, D, E and F:1997
  Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Determination of the apparent initial circumferential tensile strength. Experience our recommended plastics and rubber test equipment adherent to BS EN 1394 and BS 2782-12 here.
BS EN 1722:1999
  Light conveyor belts. Test method for the determination of the maximum tensile strength. Experience our recommended plastics and rubber test equipment adherent to BS EN 1722 here.
BS EN 1979:1999, BS 2782-11:Method 1110C:1999
  Plastics piping and ducting systems. Thermoplastics spirally-formed structured-wall pipes. Determination of the tensile strength of a seam. Experience our recommended plastics and rubber test equipment adherent to BS EN 1979 here.
BS EN 2262:1995
  Silicone rubber (VMQ/PVMQ) with high tear strength. Hardness 50 IRHD. Experience our recommended plastics and rubber test equipment adherent to BS EN 2262 here.
BS EN 2562:1997
  Carbon fibre reinforced plastics. Unidirectional laminates. Flexural test parallel to the fibre direction. Experience our recommended plastics and rubber test equipment adherent to BS EN 2562 here.
BS EN 2597:1998
  Carbon fibre reinforced plastics. Unidirectional laminates. Tensile test perpendicular to the fibre direction. Experience our recommended plastics and rubber test equipment adherent to BS EN 2597 here.
BS EN 2746:1998
  Glass fibre reinforced plastics. Flexural test. Three point bend methodGlass fibre reinforced plastics. Flexural test. Three point bend method. Experience our recommended plastics and rubber test equipment adherent to BS EN 2746 here.
BS EN 2747:1998
  Glass fibre reinforced plastics. Tensile test. Experience our recommended plastics and rubber test equipment adherent to BS EN 2747 here.
BS EN 28033:1993, ISO 8033:1991
  Rubber and plastics hose. Determination of adhesion between components. Experience our recommended plastics and rubber test equipment adherent to BS EN 28033 and ISO 8033 here.
BS EN ISO 10066:1998
  Flexible cellular polymeric materials. Determination of creep in compression. Experience our recommended plastics and rubber test equipment adherent to BS EN ISO 10066 here.
BS EN ISO 14126:1999
  Fibre-reinforced plastic composites. Determination of compressive properties in the in-plane direction. Experience our recommended plastics and rubber test equipment adherent to BS EN ISO 14126 here.
BS EN ISO 14129:1998
  Fibre-reinforced plastic composites. Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and st rength by the ± 45° tension test method. Experience our recommended plastics and rubber test equipment adherent to BS EN ISO 1429 here.
BS EN ISO 1746:2001
  Rubber or plastics hoses and tubing. Bending tests. Experience our recommended plastics and rubber test equipment adherent to BS EN ISO 1746 here.
BS EN ISO 178:2003
  Plastics. Determination of flexural properties. Experience our recommended plastics and rubber test equipment adherent to BS EN ISO 178  here.
BS EN ISO 1798:2000
  Flexible cellular polymeric materials. Determination of tensile strength and elongation at break Experience our recommended plastics and rubber test equipment adherent to BS EN ISO 1798 here.
BS EN ISO 1856:2001
  Flexible cellular polymeric materials. Determination of compression set. Experience our recommended plastics and rubber test equipment adherent to BS EN ISO 1856 here.
BS EN ISO 527-1:1996, BS 2782-3:Method 321:1994, ISO 527-1:1993
  Plastics. Determination of tensile properties. General principles. Experience our recommended plastics and rubber test equipment adherent to BS EN ISO 527-1 and BS 2782-3 and ISO 527-1 here.
BS EN ISO 527-3:1996, BS 2782-3:Method 326E:1995
  Plastics. Determination of tensile properties. Test conditions for films and sheets. Experience our recommended plastics and rubber test equipment adherent to BS EN ISO 527-3, BS 2782-3 here.
BS EN ISO 527-4:1997, BS 2782-3:Method 326F:1997
  Plastics. Determination of tensile properties. Test conditions for isotropic and orthotropic fibre-reinforced plastic composites. Experience our recommended plastics and rubber test equipment adherent to BS EN ISO 527-4, BS 2782-3 here.
BS EN ISO 527-5:1997, BS 2782-3:Method 326G:1997
  Plastics. Determination of tensile properties. Test conditions for unidirectional fibre-reinforced plastic composites. Experience our recommended plastics and rubber test equipment adherent to BS EN ISO 527-5 and BS 2782-3 here.
BS EN ISO 604:2003
  Plastics. Determination of compressive properties. Experience our recommended plastics and rubber test equipment adherent to BS EN ISO 604 here.
BS EN ISO 6252:1998
  Plastics. Determination of environmental stress cracking (ESC). Constant-tensile-stress method. Experience our recommended plastics and rubber test equipment adherent to BS EN ISO 6252 here.
BS EN ISO 6259-1:2001
  Thermoplastics pipes. Determination of tensile properties. General test method. Experience our recommended plastics and rubber test equipment adherent to BS EN ISO 6259-1 here.
BS EN ISO 6383-1:2004
  Plastics. Film and sheeting. Determination of tear resistance. Trouser test method. Experience our recommended plastics and rubber test equipment adherent to BS EN ISO 6383-1 here.
BS EN ISO 8067:1995
  Flexible cellular polymeric materials. Determination of tear strength. Experience our recommended plastics and rubber test equipment adherent to BS EN ISO 8067 here.
BS EN ISO 8295:2004
  Plastics. Film and sheeting. Determination of the coefficients of friction. Experience our recommended plastics and rubber test equipment adherent to BS EN ISO 8295 here.
BS EN ISO 899-1:2003
  Plastics. Determination of creep behaviour. Tensile creep. Experience our recommended plastics and rubber test equipment adherent to BS EN ISO 899-1 here.
BS EN ISO 899-2:2003
  Plastics. Determination of creep behaviour. Flexural creep by three-point loading. Experience our recommended plastics and rubber test equipment adherent to BS EN ISO 899-2 here.
BS ISO 11752:2000
  Flexible cellular polymeric materials. Moulded and extruded sponge or expanded cellular rubber products. Compressibility test on finished parts. Experience our recommended plastics and rubber test equipment adherent to BS EN ISO 11752 here.
BS ISO 21181
  Light conveyor belts. Method of test for the determination of the relaxed elastic modulus. Experience our recommended plastics and rubber test equipment adherent to BS ISO 21181 here.
BS ISO 21182
  Light conveyor belts. Test methods for the determination of the coefficient of friction. Experience our recommended plastics and rubber test equipment adherent to BS ISO 21182 here.
BS ISO 2285:2001
  Rubber, vulcanized or thermoplastic. Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load. Experience our recommended plastics and rubber test equipment adherent to BS ISO 2285 here.
BS ISO 3384:1999, BS 903-A42:1999
  Rubber, vulcanized or thermoplastic. Determination of stress relaxation in compression at ambient and at elevated temperatures. Experience our recommended plastics and rubber test equipment adherent to BS ISO 3384 and BS 903-A42 here.
BS ISO 34-1:2004
  Rubber, vulcanized or thermoplastic. Determination of tear strength. Trouser, angle and crescent test pieces. Experience our recommended plastics and rubber test equipment adherent to BS ISO 34-1 here.
BS ISO 36:1999, BS 903-A12:1999
  Rubber, vulcanized or thermoplastic. Determination of adhesion to textile fabric. Experience our recommended plastics and rubber test equipment adherent to BS ISO 36, BS 903-A12 here.
BS ISO 37
  Rubber, vulcanized or thermoplastic. Determination of tensile stress-strain properties. Experience our recommended plastics and rubber test equipment adherent to BS ISO 37 here.
BS ISO 5893:2002
  Rubber and plastics test equipment. Tensile, flexural and compression types (constant rate of traverse). Specification. Experience our recommended plastics and rubber test equipment adherent to BS ISO 5893 here.
BS ISO 6133:1998
  Rubber and plastics. Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength. Experience our recommended plastics and rubber test equipment adherent to BS ISO 6133 here.
BS ISO 7743:2004
  Rubber, vulcanized or thermoplastic. Determination of compression stress-strain properties. Experience our recommended plastics and rubber test equipment adherent to BS ISO 7743 here.
BS ISO 844:2004
  Rigid cellular plastics. Determination of compression properties. Experience our recommended plastics and rubber test equipment adherent to BS ISO 844 here.
EN 14882
  Rubber or plastic coated fabrics. Determination of the static and dynamic coefficient of friction. Experience our recommended plastics and rubber test equipment adherent to EN 14882 here.
ISO 17454
  Plastics piping systems. Multilayer M pipes. Test method for the adhesion of the different layers by using a pulling rig. Experience our recommended plastics and rubber test equipment adherent to ISO 17454 here.
ISO 18872
  Plastics. Determination of tensile properties at high strain rates. Experience our recommended plastics and rubber test equipment adherent to ISO 18872 here.
ISO 252
  Conveyor belts. Ply adhesion between constitutive elements. Requirements and test methods. Experience our recommended plastics and rubber test equipment adherent to ISO 252 here.
ISO 283
  Conveyor belts. Full thickness tensile strength and elongation. Specifications and method of test. Experience our recommended plastics and rubber test equipment adherent to ISO 283 here.
ISO 6914
  Rubber, vulcanized or thermoplastic. Determination of ageing characteristics by measurement of stress relaxation. Experience our recommended plastics and rubber test equipment adherent to ISO 6914 here.
ISO 8033
  Rubber and plastics hoses. Determination of adhesion between components. Experience our recommended plastics and rubber test equipment adherent to ISO 8033 here.
ISO 9856
  Conveyor belts. Determination of elastic and permanent elongation and calculation of elastic modulus. Experience our recommended plastics and rubber test equipment adherent to ISO 9856 here.